Vinyflex

Glossy air drying ink intended for printing on polycarbonate, ABS, hard PVC, polymethyl methacrylate and painted metal.
Vinyflex ink is suitable for automatic printing with convection tunnel drying.

The Vinyflex ink is particularly suitable to print on polycarbonate or even on vinyl self-adhesives when a perfect resistance to alcohol and petrol is required.
Suitable to print on most of painted metallic substrates.
This ink has great thermoformable properties.

Specifications

• Appearance: glossy
• Average density: 1,12
• Viscosity: 8 ± 1 Pa.s
• Drying: ambiant air, 12min. at 20°C / air jet dryer 45s at 50°C
• Ambient air: 12 min. at 20°C
• Air jet dryer: 45 s at 50°C
• Covering power: good
• Coverage rate: 45 m²/kg with a 120 – 34 mesh
• Special resistance: alcohol, petrol
• Weather resistance: good
• Light fastness: good
• Diluents and Cleaning solvents:
  Diluents:
  – Thinner: 4920
  – Drying activator: 4905
  – Retarder: 4960 or retargel
  – Adhesion: 9640
  – Gun: XC 876
  -Brush: 4905
  Solvents:
  – Manual: 2881, 2891, NS-81, NS-91 and NS-100
  – Washer: 2881, NS-81, NS-91 and NS-100
• Expiry: refer to the label
• Special property: thermoformable

Pantone^® colour matching

All the Viniflex inks, marked with an asterisk *, can be colour matched according to the Pantone^® colour guide through the online Colour Matching System developped by Tiflex.