Polycolor Extra-opaque
Matt air drying ink intended for printing on polycarbonate and on polyester. This ink does not adhere to PVC and is not thermoformable.Matt air drying ink intended for printing on polycarbonate and on polyester. This ink does not adhere to PVC and is not thermoformable.
Caution: Polycolor Extra-opaque ink cannot be mixed with the Polycolor standard serie.
The Polycolor Extra-opaque inks are reserved as the last opacifying layer for the front sides of treated polycarbonate and polyester.
Specifications
- Appearance: matt
- Average density: 1.35
- Viscosity: 10 ± 2 Pa.s
- Drying:
– Air: 15 min. at 20°C - Covering power by opacity: excellent
- Coverage rate: 20 to 25 m²/kg with a 61 -64 mesh
- Diluents and cleaning solvents:
Diluents:
– Thinner: 4920
– Retarder: 4960
Solvents:
– Manual: 2881, 2891, NS-81 and NS-91
– Washer: 2881, 2899, NS-81 and NS-91 - Expiry: refer to the label
Extra opaque
| Ref. 1 kg | Ref. 5 kg | |||
| Extra opaque white | 3992040 | 3994040 | ||
| Extra opaque black | 3992065 | 3994065 |
The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.
