Polytiflex
Air drying ink especially designed for printing on polyolefins (polyethylene and polypropylene): crates, buckets, etc.
The Polytiflex ink is ideal for manual or low speed printing.
To obtain excellent adherence, we recommend you to flame the substrate before printing.
Specifications
- Appearance: satin
- Average density: 1,18
- Viscosity: 12 ± 2 Pa.s
- Drying:
– Air (20°C): dust dry: 1 h
– Dry: 12 to 24 h - Covering power by opacity: good
- Coverage rate: 50 m²/l with a 120 -34 mesh
- Diluents and cleaning solvents:
Diluents:
– Thinner: 4909
– Retarder: 4900, propygel
Solvents:
– Manual: 2881, 2899, NS-81 and NS-99
– Washer: 2881, 2899, NS-81 and NS-99 - Expiry date: refer to the label
Standard colours
Ref. 1 litre | |||
White 6100 | 3432009 | ||
Lemon OP | 3432002 | ||
Gold yellow OP | 3432004 | ||
Orange OP | 3432006 | ||
Cherry red OP | 3432008 | ||
Primary blue OP 6140 | 3432063 | ||
Royal blue OP 6135 | 3432054 | ||
Deep green OP | 3432034 | ||
Black 6165 | 3432081 |
Base
Ref. 1 kg | |
Thinner base 4720 and overprint varnish | 3432090 |
The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.